How to Install a Brock Black Designs Handlebar Holster (Standard & Universal Bar Mount)

firearm mount, handlebar holster, how to, installation guide, motorcycle holster -

How to Install a Brock Black Designs Handlebar Holster (Standard & Universal Bar Mount)

The Brock Black Designs handlebar holster lets you keep your sidearm secure and accessible on your motorcycle — mounted right on the bars where you need it. Installation is straightforward, but taking your time with each step ensures a safe, rattle-free mount. Here's the complete guide.

Before You Begin

Inspect the kit and all components before starting:

  • Lay out all holster components in a clean, well-lit workspace.
  • Inspect every piece for visible defects, damage, or missing parts. Do not proceed if any issues are found.
  • If anything is missing or damaged, contact Brock Black Designs at 208-705-0028 (US & Canada only) or visit brockblackdesigns.com.

Fitment / Compatibility

Brock Black Designs offers handlebar holsters in multiple bar diameter configurations — make sure you have the right adapter for your bars:

  • 0.75” to 1.25” bars — Universal Bar Holster with .75–1.25" adapters
  • 1” to 1.5” bars — Universal Bar Holster with 1–1.5" adapter
  • 1.5” to 2” bars — Universal Bar Holster or Handlebar Holster with 1.5–2" ring adapter
  • Full size sidearm — Universal Bar Holster Full Size Sidearm

Verify fitment for your specific bar diameter and firearm at brockblackdesigns.com.

Tools Required

  • Appropriate screwdriver or hex/Allen key (per included hardware)
  • Torque wrench (recommended)
  • Clean cloth or rag

Step-by-Step Installation

Step 1 – Inspect All Screws and Fasteners

Before installing anything, carefully examine every screw and fastener in the kit:

  • Check for stripping, bending, corrosion, or any other damage.
  • Confirm each screw is the correct size and type as specified in your kit.
  • Do not use damaged fasteners — contact us for replacements before proceeding.

Step 2 – Prepare the Mounting Area

Clean the section of handlebar where the holster will mount:

  • Wipe the bar surface with a clean cloth to remove any grease, wax, or debris.
  • A clean, dry surface ensures the mount clamps securely without slipping.
  • Identify your preferred mounting position — most riders mount on the left bar, inboard of the grip, for easy access.

Step 3 – Select and Attach the Correct Bar Adapter

Match the adapter to your handlebar diameter and attach it to the holster mount clamp. The adapter creates a snug fit around your specific bar size — using the wrong adapter will result in a loose or unstable mount.

Step 4 – Position the Holster on the Bars

Slide the holster assembly onto the handlebar at your chosen position. Before tightening:

  • Sit on the bike and confirm the holster position feels natural and accessible.
  • Make sure the holster opening is oriented for a clean draw without interference from controls, cables, or your hands on the grips.
  • Check that the holster does not interfere with handlebar movement — turn bars lock-to-lock to verify clearance.

Step 5 – Tighten the Mounting Hardware

Using the appropriate tool, tighten all screws and fasteners to secure the holster to the bar:

  • Tighten in a cross pattern if there are multiple fasteners to ensure even clamping pressure.
  • Do not overtighten — excessive force can crack the mount, damage the bar finish, or deform the adapter.
  • Snug and firm is correct. If you have a torque wrench, follow the spec in your included instruction sheet.

Step 6 – Post-Installation Inspection

Once the holster is mounted, do a thorough check before riding:

  • Inspect the entire assembly — confirm all fasteners are tight and nothing is loose.
  • Turn the handlebars lock-to-lock again to verify no cables, lines, or controls are pinched or restricted.
  • Test with an unloaded firearm — confirm the fit is secure, the retention is correct, and the draw is smooth and unobstructed.
  • Never test with a loaded firearm during installation.

Step 7 – Periodic Maintenance

After your first ride and periodically thereafter:

  • Check all mounting fasteners for tightness — vibration can loosen hardware over time.
  • Inspect the holster body for wear or cracking.
  • Re-test retention with an unloaded firearm if the holster has been removed and reinstalled.

Safety Disclaimer

Brock Black Designs is not responsible for any damage or injury resulting from improper installation, use, or maintenance of the holster. By proceeding with installation, you acknowledge that you have inspected all components and accept responsibility for proper installation and use. Always follow all applicable local, state, and federal laws regarding the carry and transport of firearms on a motorcycle.

Shop Handlebar Holsters

Find the right holster for your bar diameter and sidearm:

Questions about fitment or which holster is right for your setup? Call 208-705-0028 or send us a message — we're happy to help.

Zurück zu Nachricht

Tags